Associate Degree
A.S. in Welding Technology
The Welding Technology degree provides skills and knowledge in manual and semi-automatic welding processes used in the metal fabrication and construction industries. Instruction covers materials, equipment, procedures, testing techniques as well as safety and blueprint reading. Competencies include techniques of joining ferrous and non-ferrous metals by the use of Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW), Flux Cored Arc Welding (FCAW), and Gas Tungsten Arc Welding (GTAW), and welding procedures.
Catalog Date: August 1, 2024
| Course Code |
Course Title |
Units |
| WELD 140 |
Mathematics for Welding Technicians |
3 |
| WELD 300 |
Introduction to Welding |
3 |
| WELD 302 |
Introduction to Welding Metallurgy |
3 |
| WELD 316 |
Welding Inspection |
2 |
| WELD 320 |
Shielded Metal Arc Welding Structural |
3 |
| WELD 322 |
Shielded Metal Arc Welding (Pipe) |
3 |
| WELD 330 |
Gas Tungsten Arc Welding (Plate) |
3 |
| WELD 332 |
Gas Tungsten Arc Welding (Pipe) |
3 |
| WELD 333 |
Gas Metal Arc Welding, Steel |
3 |
| WELD 334 |
Gas Metal Arc Welding: Ferrous and Non-Ferrous Metals |
2 |
| WELD 335 |
Flux Core Arc Welding |
3 |
| WELD 342 |
Symbol Reading, Layout and Fabrication |
3 |
| WELD 155 |
Industry Training (3) |
0.5 - 41 |
| or WELD 115 |
Code Welding (2) |
|
| or WELD 298 |
Work Experience in Welding (0.5 -4) |
|
| Total Units: |
|
34.5 - 38 |
1 A minimum of 1 unit from the following courses.
The Welding Technology Associate in Science (A.S.) degree may be obtained by completion of the required program, plus general education requirements, plus sufficient electives
to meet a 60-unit total. See ARC graduation requirements.
Upon completion of this program, the student will be able to:
- select the correct electrode classification and parameters for various thickness of material and welding positions on ferrous and nonferrous metals.
- define principles of GMAW.
- interpret GMAW electrode and classification and specification.
- describe GMAW welding operations of various joint designs using selected electrodes on different positions.
- describe SMAW operations of various positions using selected electrodes on different joint designs.
- define principles of arc welding.
- select correct electrode amperage settings for the job application.
- identify GTAW principles and safe welding practices.
- define GTAW applications and limitations.
- explain the reason for the formation of each discontinuity type, and distinguish different discontinuities.
- interpret fabrication blueprints using a systematic process.
- interpret graphic welding symbols.
- relate the requirements for welding ferrous and nonferrous metals.
- select the appropriate setting and application methods.
- list the methods used for discontinuity prevention and identify surface defects in welds.
Welding certification is recognized by the welding industry as an important step in the profession. The American Welding Society (AWS) nationally accredits American River College's welding program. The ARC welding program has met all the requirements of the AWS QC4 standards for Accreditation of Test Facilities for their Certified Welder Program. Graduating students may find positions in oil refineries, nuclear power plants, aerospace, structural buildings, bridge construction, auto industry, and small commercial fabricating shops.
Certificates of Achievement
Shielded Metal Arc Plate and Pipe Certificate
This certificate promotes competence in plate and pipe welding. Emphasis is on power sources, electrode selection on various joint designs, techniques, and positions in welding. Instruction includes safety and proper procedures in making fillet and groove welds that are in compliance with structural and pipe welding codes.
Catalog Date: August 1, 2024
| Course Code |
Course Title |
Units |
| WELD 300 |
Introduction to Welding |
3 |
| WELD 320 |
Shielded Metal Arc Welding Structural |
3 |
| WELD 322 |
Shielded Metal Arc Welding (Pipe) |
3 |
| Total Units: |
|
9 |
Upon completion of this program, the student will be able to:
- interpret electrode classification and specification
- select correct amperage setting for the job application
- define principles of arc welding
- certify and perform SMA operations in various positions using selected electrodes on different joint designs
Welding Metallurgy and Inspection (270 hours) Certificate
The Welding Metallurgy and Inspection certificate provides the science of metallurgy and weld inspection. Emphasis is on the identification and selection of irons and steel, mechanical and physical properties of metals and crystal structures of metals, rules and regulations of the welding construction industry, and principles, requirements and methods of inspection.
Catalog Date: August 1, 2024
| Course Code |
Course Title |
Units |
| WELD 302 |
Introduction to Welding Metallurgy |
3 |
| WELD 316 |
Welding Inspection |
2 |
| WELD 117 |
Ultrasonic Testing Level One |
3 |
| WELD 118 |
Ultrasonic Testing Level Two |
3 |
| WELD 300 |
Introduction to Welding |
3 |
| Total Units: |
|
14 |
Upon completion of this program, the student will be able to:
- Describe the mechanical properties of different types of metals
- Interpret and explain the Nondestructive Testing (NDT) procedures of codes and specifications relating to welding
- Evaluate and explain in simple terms the reason for the formation of discontinuity in each of the welding processes
- Explain different methods used for the prevention of weld discontinuities
- Describe the crystalline structures of metals and explain how grain forms in metal
- Explain the problems hydrogen causes when welding steel
- Analyze phase diagrams of carbon and stainless steels
Welding Technology Certificate
This certificate provides skills and knowledge in manual and semi-automatic welding processes used in the metal fabrication and construction industries. Instruction covers materials, equipment, welding procedures, testing techniques, inspection, welding metallurgy, blueprint reading, and welding safety. Competencies include techniques of joining ferrous and non-ferrous metals by the use of Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW), Flux Cored Arc Welding (FCAW), and Gas Tungsten Arc Welding (GTAW). Oxyacetylene welding, oxyacetylene cutting and plasma arc cutting, are also covered.
Catalog Date: August 1, 2024
| Course Code |
Course Title |
Units |
| WELD 140 |
Mathematics for Welding Technicians |
3 |
| WELD 300 |
Introduction to Welding |
3 |
| WELD 302 |
Introduction to Welding Metallurgy |
3 |
| WELD 316 |
Welding Inspection |
2 |
| WELD 320 |
Shielded Metal Arc Welding Structural |
3 |
| WELD 322 |
Shielded Metal Arc Welding (Pipe) |
3 |
| WELD 330 |
Gas Tungsten Arc Welding (Plate) |
3 |
| WELD 332 |
Gas Tungsten Arc Welding (Pipe) |
3 |
| WELD 333 |
Gas Metal Arc Welding, Steel |
3 |
| WELD 334 |
Gas Metal Arc Welding: Ferrous and Non-Ferrous Metals |
2 |
| WELD 335 |
Flux Core Arc Welding |
3 |
| WELD 342 |
Symbol Reading, Layout and Fabrication |
3 |
| WELD 155 |
Industry Training (3) |
0.5 - 41 |
| or WELD 115 |
Code Welding (2) |
|
| or WELD 298 |
Work Experience in Welding (0.5 -4) |
|
| Total Units: |
|
34.5 - 38 |
1A minimum of 1 unit from the following courses.
Upon completion of this program, the student will be able to:
- list the factors that must be considered before a welding process is selected.
- evaluate a weld according to a given standard or code.
- compare the three types of welding current used for Gas Tungsten Arc Welding.
- define voltage, electrical potential, amperage, and electrical current as related to Gas Metal Arc Welding.
- discuss how the Gas Metal Arc Welding molten weld pool can be controlled by varying the shielding gas, power settings, weave pattern, travel speed, electrode extension, and gun angle.
- explain what each of the digits in a standard Flux Cored Arc Welding electrode identification number mean.
- list and define the three units used to measure a welding current.
- give the characteristics of the three filler metal groups E6010 and E6011, E6012 and E6013, and E7016 and E7018.
- discuss three general categories of pipe welds including how they are used and what type of weld root penetration and strength they require.
- make a single V-groove butt welded joint on a pipe in any position to code specifications.
- list the crystalline structures of metals and explain how grains form.
- describe practical applications of metallurgy.
- solve basic welding fabrication math problems.
- read a set of welding blueprint drawings and explain each item shown and its dimensioning.
Graduates may find employment in a number of industries including; pipe line construction, oil refining, aerospace, structural building, bridge construction, automotive, and small commercial fabricating. They may also work as welding shop supervisors and welding sales persons, and they can also become welding shop owners.
Certificates
Gas Metal Arc and Flux Core Arc Welding Plate (252 hours) Certificate
The Gas Metal Arc Welding certificate promotes competence in welding with different types of metal transfer, constant voltage power sources, different types of shielding gases, and electrode selection on various joint designs. Instruction is provided in gas metal and flux cored arc welding on fillet and groove welds to specific structural and pipe standards.
Catalog Date: August 1, 2024
| Course Code |
Course Title |
Units |
| WELD 333 |
Gas Metal Arc Welding, Steel |
3 |
| WELD 334 |
Gas Metal Arc Welding: Ferrous and Non-Ferrous Metals |
2 |
| WELD 300 |
Introduction to Welding |
3 |
| WELD 335 |
Flux Core Arc Welding |
3 |
| Total Units: |
|
11 |
Upon completion of this program, the student will be able to:
- select the correct electrode classification and parameters for various thicknesses of material and welding positions on ferrous and nonferrous metals
- define principles of gas metal arc welding
- interpret electrode classification and specification
- analyze gas metal arc welding operations on various joint designs using selected electrodes for different welding positions
Gas Tungsten Arc Plate and Pipe Welding (180 hours) Certificate
The Gas Tungsten Arc Welding certificate promotes competence in welding ferrous and nonferrous materials. Emphasis is on proper use of gas tungsten arc welding (GTA) equipment setup requirements, process variables, material requirements, and welding procedures that are in compliance with industry standards.
Catalog Date: August 1, 2024
| Course Code |
Course Title |
Units |
| WELD 330 |
Gas Tungsten Arc Welding (Plate) |
3 |
| WELD 300 |
Introduction to Welding |
3 |
| WELD 332 |
Gas Tungsten Arc Welding (Pipe) |
3 |
| Total Units: |
|
9 |
Upon completion of this program, the student will be able to:
- identify GTA principles and safe practices.
- define GTA applications and limitations.
- weld mild steel, stainless steel, and aluminum alloys using GTA procedures in all positions.
- evaluate and demonstrate procedures for a given welding project or application.
- relate the requirements of welding ferrous and nonferrous materials.
- select the appropriate settings and applications methods of GTA process.
Pipe Welding Certificate
This certificate promotes competence in pipe welding with emphasis on power sources, electrode/filler metal selection on various joint designs, techniques, and positions for welding. Instruction includes safety, math, and proper procedures in making fillet and groove welds that are in compliance with structural and pipe welding codes.
Catalog Date: August 1, 2024
| Course Code |
Course Title |
Units |
| WELD 140 |
Mathematics for Welding Technicians |
3 |
| WELD 322 |
Shielded Metal Arc Welding (Pipe) |
3 |
| WELD 332 |
Gas Tungsten Arc Welding (Pipe) |
3 |
| Total Units: |
|
9 |
Upon completion of this program, the student will be able to:
- interpret electrode and filler metal classifications and specifications.
- select correct amperage setting for the job application.
- define principles of arc welding.
- perform Shielded Metal Arc Welding and Gas Tungsten Arc Welding operations in various positions using selected electrodes on different joint designs.
- use math in welding applications.
Certificate completers may find employment in a number of industries, including PG&E pipeline construction, oil refining, power generation, structural building, bridge construction, and small commercial fabricating shops.
Welding Equipment Maintenance and Blueprint Interpretation (234 hours) Certificate
This certificate promotes competence in solving equipment, mathematical and manufacturing problems that apply to the welding trade. It emphasizes metal placement, measurement, and layout of tools used in construction, as well as the fundamentals of blueprint reading and welding equipment repair.
Catalog Date: August 1, 2024
| Course Code |
Course Title |
Units |
| WELD 107 |
Welding Equipment Maintenance |
3 |
| WELD 140 |
Mathematics for Welding Technicians |
3 |
| WELD 300 |
Introduction to Welding |
3 |
| WELD 342 |
Symbol Reading, Layout and Fabrication |
3 |
| Total Units: |
|
12 |
Upon completion of this program, the student will be able to:
- evaluate algebraic expressions by substituting given numbers for letter values
- solve formulas by substituting numbers for letters, analyzing word statements and diagram values
- compute the area, radius, and diameter of a circle
- compute area, radius, and central angles of a sector
- measure angles in degrees, minutes, and seconds
- identify and demonstrate the proper use of common power tools and accessories used in the welding trade
- interpret fabrication blueprints using a systematic process
- interpret graphic welding symbols
- interpret electrical and electronically controlled circuits
- evaluate testing equipment used for welding maintenance repair
Welding (WELD) Courses
WELD 105 Introduction to Metal Sculpture
- Units:1.5
- Hours:18 hours LEC; 27 hours LAB
- Prerequisite:None.
- Catalog Date:August 1, 2024
This course covers metal sculpture techniques, design principles, and materials used for sculpture for functional and nonfunctional art forms, on ferrous and non-ferrous metals. Techniques on the major welding processes such as Shielded Metal Arc, Gas Metal Arc, Gas Tungsten Arc, and Oxy-Acetylene are an integral part of the course, as well as related safety issues.
Upon completion of this course, the student will be able to:
- apply safety standards to each welding process and other related metal working equipment.
- apply traditional and non-traditional metal working techniques to design and execute 3-dimensional functional and nonfunctional art forms.
- utilize welding and cutting processes to construct art projects.
- inspect welding for projects and make corrective changes to create structurally sound connections.
WELD 107 Welding Equipment Maintenance
- Units:3
- Hours:36 hours LEC; 54 hours LAB
- Prerequisite:None.
- Catalog Date:August 1, 2024
This course covers the basics of welding equipment maintenance, troubleshooting, and repair. Electrical and electronically controlled circuits are discussed and tested. Overall theory of operation and safety are presented, as well as maintenance scheduling and the use of electronic test equipment and other measuring devices. Field trips may be required.
Upon completion of this course, the student will be able to:
- identify the electronic components of a welding power supply.
- evaluate the operating characteristics of various types of welding equipment.
- conduct research on the operation and purchase of welding equipment components that require replacement or repair.
- apply critical thinking analysis towards the troubleshooting and repair of welding equipment.
- properly use test equipment needed in the problem solving and repair of nonoperational equipment.
- apply the required knowledge of the electrical components and their connection to welding power supplies to produce satisfactory welds.
- determine the proper way of connecting welding equipment to the correct power source during the installation process.
- apply the required safety procedures when maintaining or repairing any type of welding equipment.
WELD 115 Code Welding
- Units:2
- Hours:18 hours LEC; 54 hours LAB
- Prerequisite:WELD 300 with a "C" grade or better, or a minimum of one year of welding experience.
- Catalog Date:August 1, 2024
This course provides individualized training for welder performance qualification. Code and test requirements are presented. Welders select the code, metal, process, and positions to be used. Preparation for competing in the SkillsUSA regional, state, and national competition is also covered. This course may be taken up to four times for credit with different competitions. A field trip and participation at the site of the SkillsUSA regional competition are required.
Upon completion of this course, the student will be able to:
- perform arc welding that meets SkillsUSA standards.
- analyze welding projects and make corrective changes to meet SkillsUSA standards.
- understand the parameters of a specified welding procedure.
- apply safety rules and regulations for welding and metal cutting.
- explain the variables for each chosen process.
- explain the requirements for the SkillsUSA competitions.
- understand the requirements for testing according to the various welding codes.
WELD 117 Ultrasonic Testing Level One
- Units:3
- Hours:45 hours LEC; 27 hours LAB
- Prerequisite:None.
- Advisory:Eligible for ENGRD 310 or ENGRD 312 AND ENGWR 300; OR ESLW 340.
- Catalog Date:August 1, 2024
This course covers the theory, technique, application, and evaluation used in the material processing, welding, and inspection industries. Ultrasonic testing as applied to industry practices, such as building construction, aeronautics, shipbuilding, materials fabrication, and others, is covered. Successful completion of this course certifies that the requirements of the American Society of Nondestructive Testing (ASNT) TC-1A for UT level I are met.
Upon completion of this course, the student will be able to:
- perform basic material testing.
- explain the basic physical principles of ultrasonic testing.
- describe basic ultrasonic machine functions.
- perform basic machine and testing calibrations.
WELD 118 Ultrasonic Testing Level Two
- Units:3
- Hours:45 hours LEC; 27 hours LAB
- Prerequisite:WELD 117 with a "C" or better, or evidence of completion of UT Level I certification.
- Advisory:Eligible for ENGRD 310 or ENGRD 312 AND ENGWR 300; or ESLW 340.
- Catalog Date:August 1, 2024
This course covers advanced theory, technique application, and evaluation techniques used in the material processing, welding, and inspection industries. It covers advanced ultrasonic testing as applied to industry practices such as building construction, aeronautics, shipbuilding, and materials fabrication. Successful completion of this course meets the requirements of the American Society of Nondestructive Testing (ASNT) TC1-A for Ultrasonic Testing Level II.
Upon completion of this course, the student will be able to:
- calibrate an ultrasonic testing machine to the proper standards.
- demonstrate proper techniques when examining materials and/or welds.
- evaluate ultrasonic test results to ensure they meet code requirements.
- perform inspections that meet industry standards.
WELD 140 Mathematics for Welding Technicians
- Units:3
- Hours:54 hours LEC
- Prerequisite:None.
- General Education:AA/AS Area II(b)
- Catalog Date:August 1, 2024
This course covers the application of mathematics principles in technical and trade work. Areas covered are fundamentals of general mathematics, common fractions, decimal fractions, percent, signed numbers, measurements, customary measurement units, metric measurement units, steel rules and vernier calipers, fundamentals of algebra, basic algebraic operations, fundamentals of plane geometry, triangles, polygons, circles, areas, volumes, and fundamentals of trigonometry.
Upon completion of this course, the student will be able to:
- interpret and apply common welding formulas.
- demonstrate problem-solving skills for technical and trade work.
- analyze problems that are encountered in metal fabrication.
- solve equations needed in the welding field.
WELD 150 Employability Skills for Technical Careers
- Same As:AT 107 and ET 250
- Units:2
- Hours:36 hours LEC
- Prerequisite:None.
- Advisory:Eligible for ENGRD 310 or ENGRD 312 AND ENGWR 300; OR ESLW 340.
- General Education:AA/AS Area III(b)
- Catalog Date:August 1, 2024
This course provides the opportunity to explore technical careers while developing valuable work and life skills. It is an introduction to a variety of technically-related occupations, emphasizing technical careers in the Sacramento area. Activities are designed to enhance personal development, employability skills, and self esteem through leadership, citizenship, and character development. This course is not open to students who have completed AT 107 or ET 250.
Upon completion of this course, the student will be able to:
- identify personal interests as related to career choices.
- demonstrate effective communication skills.
- demonstrate personal qualities that are desirable in the workplace.
- create long-term and short-term goals.
WELD 155 Industry Training
- Units:3
- Hours:36 hours LEC; 54 hours LAB
- Prerequisite:None.
- Catalog Date:August 1, 2024
This course covers welding processes, knowledge, and skills specific to employers' needs. Workplace safety and etiquette are included. Metal fabrication skills for specific employment needs and welding certification testing are covered if requested by employers.
Upon completion of this course, the student will be able to:
- select welding processes and fabrication variables.
- prepare metal fabrications to basic prints.
- produce welds to code standards.
- demonstrate proper workplace etiquette.
WELD 294 Topics in Welding
- Units:0.5 - 5
- Hours:9 hours LEC; 27 - 270 hours LAB
- Prerequisite:None.
- Catalog Date:August 1, 2024
This course provides an opportunity to study current topics in welding technology that are not included in existing courses.
Upon completion of this course, the student will be able to:
- research the specialized needs of a manufacturer
- formulate tasks related to the specific needs of the company
- access information effectively and efficiently for welding standards used in manufacturing
- evaluate welding procedure information to specific standards
WELD 295 Independent Studies in Welding
- Units:1 - 3
- Prerequisite:None.
- Catalog Date:August 1, 2024
WELD 298 Work Experience in Welding
- Units:0.5 - 4
- Hours:27 - 216 hours LAB
- Prerequisite:None.
- Enrollment Limitation:Students must be in a paid or unpaid internship, volunteer position, or job related to the welding field with a cooperating site supervisor. Students are advised to consult with the Welding Department faculty to review specific certificate and degree work experience requirements.
- Advisory:Eligible for ENGWR 300 or ESLW 340.
- General Education:AA/AS Area III(b)
- Catalog Date:August 1, 2024
This course provides students with opportunities to develop marketable skills in preparation for employment or advancement within the welding field. It is designed for students interested in work experience and/or internships in associate degree level or certificate occupational programs. Course content includes understanding the application of education to the workforce, completion of Title 5 required forms which document the student's progress and hours spent at an approved work site, and developing workplace skills and competencies.
During the semester, the student is required to complete 27 hours of related work experience for 0.5 unit. An additional 27 hours of related work experience is required for each additional 0.5 units. All students are required to attend the first course meeting, a mid-semester meeting, and a final meeting. Additionally, students who have not already successfully completed a Work Experience course will be required to attend weekly orientations while returning participants may meet individually with the instructor as needed. Students may take up to 16 units total across all Work Experience course offerings. This course may be taken up to four times when there are new or expanded learning objectives. Only one Work Experience course may be taken per semester.
Upon completion of this course, the student will be able to:
- demonstrate mastery of specific job skills in the welding field related to an associate degree or certificate occupational program level career as written in the minimum three (3) learning objectives created by the student and their employer or work site supervisor at the start of the course.
- make effective decisions, use workforce information, and manage their personal career plans.
- behave professionally, ethically, and legally during work, consistent with applicable laws, regulations, and organizational norms.
- behave responsibly during work, exhibiting initiative and self-management in situations where it is needed.
- apply effective leadership styles during work, with consideration to group dynamics, team and individual decision making, and workforce diversity.
- communicate in oral, written, and other formats, as needed, in a variety of contexts during work.
- locate, organize, evaluate, and reference information during work.
- demonstrate originality and inventiveness during work by combining ideas or information in new ways, making connections between seemingly unrelated ideas, and reshaping goals in ways that reveal new possibilities using critical and creative thinking skills such as logical reasoning, analytical thinking, and problem-solving.
WELD 299 Experimental Offering in Welding
- Units:0.5 - 4
- Prerequisite:None.
- Catalog Date:August 1, 2024
This is the experimental courses description.
WELD 300 Introduction to Welding
- Units:3
- Hours:36 hours LEC; 54 hours LAB
- Prerequisite:None.
- Transferable:CSU
- Catalog Date:August 1, 2024
This course is an introduction to welding processes, including shielded metal arc, gas metal arc, flux-cored gas shield and self shield, gas tungsten arc, oxyacetylene cutting and welding on joint designs, and positions used in industry. Safety in arc welding, oxyacetylene, and plasma cutting is also covered. Field trips may be required.
Upon completion of this course, the student will be able to:
- apply safety standards to each welding process.
- demonstrate proper welding techniques for each welding process.
- evaluate welding projects in accordance with D1.1 Structural Welding Code-Steel Welding Procedures and Specifications.
- analyze welding projects and make corrective changes to meet industry standards.
- perform skills in arc welding that meet industry standards.
WELD 302 Introduction to Welding Metallurgy
- Units:3
- Hours:36 hours LEC; 54 hours LAB
- Prerequisite:None.
- Corequisite:WELD 300
- Transferable:CSU
- Catalog Date:August 1, 2024
This course provides a general overview of basic metallurgy of ferrous and non-ferrous metals. Topics include various steel making processes, different types of furnaces, identifying types of steels, and their mechanical, physical, chemical, and electrical properties. Crystal structures of metals, the iron equilibrium diagram, the periodic table of elements emphasizing those elements associated with steels, metallurgical failure of welds, steel deformation, and heat treatment of steels are also covered. In addition, material hardness using different hardness testing methods, calculation of different steel strengths and stresses, and impact tests using the Charpy and Izod methods are covered. Field trips may be required.
Upon completion of this course, the student will be able to:
- describe practical applications of metallurgy.
- classify various steel making processes.
- evaluate how steel is formed into various shapes and products.
- evaluate the different types of iron and steel alloy.
- describe the mechanical and physical properties of metal.
- describe the basic metallurgical concept of iron, steel, and cast iron.
- use the iron carbon equilibrium diagram to explain phase changes of iron and steel.
- explain the micro structural analyses of steel.
- explain heat treating and quenching.
- explain annealing and normalizing.
- explain isothermal transformation diagrams.
- explain tempering.
- explain metallurgical and chemical terminology.
- explain how temperature affects distortion.
- evaluate different types of material strengths.
- compare steel hardness using different hardness testing methods.
- explain surface hardening.
- analyze tensile and hardness tests.
WELD 316 Welding Inspection
- Units:2
- Hours:36 hours LEC
- Prerequisite:WELD 300 with a grade of "C" or better; OR at least one year of welding experience.
- Advisory:Eligible for ENGRD 310 or ENGRD 312 AND ENGWR 300; or ESLW 340.
- Transferable:CSU
- Catalog Date:August 1, 2024
This course covers the welding requirements for any type of welded structure made from commonly used carbon and low-alloy steel construction. Topics include the welding construction industry, rules, regulations, and the principles, requirements, and methods of inspection. It covers weld measurements and discontinuities for evaluation acceptance using a variety of tools. It also emphasizes the lines of communication between the plant managers, welders, welding engineers, design/project engineers, welding foreman/supervisors, shop or field superintendents, and reporting supervisors. This course offers preparation for the Certified Welding Inspector Examination given by the American Welding Society.
Upon completion of this course, the student will be able to:
- explain the scope and limitations of the Structural Welding Code (D1.1).
- explain safe practices for welding inspectors.
- analyze the requirements for a pre-qualified welding procedure.
- describe the qualification requirements of welding procedures and welding personnel, such as welders, welding operators, and tack welders, necessary to perform code work.
- explain the requirements for the preparation, assembly, and workmanship of welded steel structures to personnel.
- examine the qualification and responsibilities of inspectors, acceptance criteria for production welds, and standard procedures for performing visual inspection.
- explain the metal joining and cutting processes used in manufacturing.
- evaluate weld and base metal discontinuities.
- explain the mechanical and chemical properties of metals.
- interpret the requirements for the design of welded connections.
- interpret weld-joint geometry and weld-symbol dimensioning.
- explain the welding metallurgy of commonly used materials.
- demonstrate effective communication skills in the work place.
WELD 320 Shielded Metal Arc Welding Structural
- Units:3
- Hours:36 hours LEC; 54 hours LAB
- Prerequisite:WELD 300 with a grade of "C" or better; OR at least one year of welding experience.
- Advisory:Eligible for ENGRD 310 or ENGRD 312 AND ENGWR 300; or ESLW 340.
- Transferable:CSU
- Catalog Date:August 1, 2024
This course covers employment training for welding technicians. It emphasizes developing manipulative proficiency in the use of Shielded Metal Arc Welding (SMAW) in the horizontal (2F-2G), vertical (3F-3G), and overhead (4F-4G) positions on steel. It also covers filler metal classifications, welding power supplies, and welding safety. Welding test plates in accordance with the requirements to AWS D1.1 Structural Welding Code and AWS D1.5 Bridge Code are also covered.
Upon completion of this course, the student will be able to:
- demonstrate welding skills on joint designs and positions used in industry.
- explain arc blow, what causes it, and how to control it.
- explain the characteristics of the four filler metal groups for steel.
- define arc length, and describe the effects of using an improper arc length.
- explain and define the three units used to measure welding current.
- define open circuit voltage and operating voltage.
- analyze a welding machine duty cycle chart and explain its significance.
- describe the effects of the welding essential variables by comparing the bead's shape for weld width, reinforcement height, and appearance.
- evaluate a weld according to a given standard or code.
- analyze welding procedures used in manufacturing for production welding.
- describe the use of destructive and nondestructive testing for weld testing.
- evaluate welding symbols standards used in the industry.
WELD 322 Shielded Metal Arc Welding (Pipe)
- Units:3
- Hours:36 hours LEC; 54 hours LAB
- Prerequisite:WELD 320 with a grade of "C" or better; OR a minimum of 2 years of welding experience.
- Advisory:Eligible for ENGRD 310 or ENGRD 312 AND ENGWR 300; or ESLW 340.
- Transferable:CSU
- Catalog Date:August 1, 2024
This course covers the applications of shielded metal arc welding used to join low-pressure piping systems that carry water and residential natural gas. Topics include: welding required for high pressure critical piping systems such as steam pipe, fuel transportation pipe lines, boilers, offshore oil-rigs, and other critical heavy-duty piping systems.
Upon completion of this course, the student will be able to:
- explain the code used for structural, refinery, and fuel transport piping systems.
- describe the system for depicting welding on a pipe print.
- distinguish between pipe and tubing.
- distinguish the different weld passes on pipe joints and explain the purpose of each one.
- inspect and evaluate welds on pipe according to code standards.
- describe the four pipe positions.
- identify the pipe positions to qualify welders for all positions of pipe welding.
WELD 330 Gas Tungsten Arc Welding (Plate)
- Units:3
- Hours:36 hours LEC; 54 hours LAB
- Prerequisite:WELD 300 with a grade of "C" or better; OR at least one year of welding experience.
- Advisory:Eligible for ENGRD 310 or ENGRD 312 AND ENGWR 300; OR ESLW 340.
- Transferable:CSU
- Catalog Date:August 1, 2024
This course covers Gas Tungsten Arc Welding (GTAW) of aluminum, stainless steel, carbon steel, and other metals used in industry. This course content is relevant to code welding in accordance with the American Society of Mechanical Engineers Section 1X (ASME), the Structural welding Code D1.1 (AWS), and the American Petroleum Institute 1104 (API). It also covers filler metal selection, both specifications and classifications, shielding gases, welding power supplies, and welding safety. Certification and procedure qualification to code specifications are also covered.
Upon completion of this course, the student will be able to:
- identify the variables that must be considered when setting up the components of the GTAW system.
- demonstrate safety precautions regarding electrical current, inert gases, the welding environment, and other areas of concern, such as hot work and ventilation.
- explain equipment components and accessories.
- analyze the factors of current type, amperage ranges, duty cycle, and adequate control during the welding operation to determine the selection of a power supply for welding.
- identify and explain functions of shielding gases in the GTAW system.
- design a welding procedure using GTAW for the root pass, fill passes, and cover passes.
- interpret the factors that determine the selection of filler materials.
- evaluate each weld by using the visual inspection method for defects according to the ASME, the AWS, and the API 1104 standards.
WELD 332 Gas Tungsten Arc Welding (Pipe)
- Units:3
- Hours:36 hours LEC; 54 hours LAB
- Prerequisite:WELD 330 with a grade of "C" or better; OR a minimum of two years of welding experience.
- Advisory:Eligible for ENGRD 310 or ENGRD 312 AND ENGWR 300; OR ESLW 340.
- Transferable:CSU
- Catalog Date:August 1, 2024
This course covers the application of low-pressure and high-pressure critical piping systems used in oil, gas, nuclear, and chemical industries. It covers Gas Tungsten Arc Welding (GTAW) of aluminum pipe, stainless steel pipe, and carbon steel pipe. It explores code welding in accordance with the American Society of Mechanical Engineers Section 1X (ASME), Structural Welding Code D1.1 (AWS), and American Petroleum Institute 1104 (API). Certification and procedure qualification to ASME Section 1X, AWS D1.1, API 1104 code specifications are also covered.
Upon completion of this course, the student will be able to:
- describe joint design and joint preparation.
- analyze and interpret the most common root defects and the causes for each one.
- evaluate the use of a hot pass.
- explain reasons for purging pipe weld areas and describe the criteria for selecting gases used for purging.
- describe the different types of purging dams.
- explain root purging operation and oxygen level test.
- perform tack welding procedures.
- perform torch manipulation and welding techniques used for welding pipe.
- examine and evaluate welded pipe according to AWS, ASME and API standards.
- explain how to make a single V-groove weld on pipe in any position.
- identify areas to be inspected when performing GTAW pipe operations.
- identify and describe types of weld integrity test performed on a welded pipe.
- interpret Procedure Qualification Record (PQR) and produce Welding Procedure Specification (WPS).
WELD 333 Gas Metal Arc Welding, Steel
- Units:3
- Hours:36 hours LEC; 54 hours LAB
- Prerequisite:WELD 300 with a grade of "C" or better, or a minimum of one year of welding experience.
- Transferable:CSU
- Catalog Date:August 1, 2024
This course is the study of welding using the Gas Metal Arc Welding (GMAW) process on carbon steels in accordance with the American Welding Society (AWS), Structural welding Code D1.1, and Sheet Steel Code D1.3. It covers semi-automatic wire-feed welding with micro wires on steel plates of varying thicknesses. It also covers joint design and all welding positions, welding power supplies, types of metal transfer (spray, globular, pulsed-arc, and short circuit), filler metal selection, both specifications and classifications, shielding gases used for each type of transfer, and welding safety.
Upon completion of this course, the student will be able to:
- describe how to use Gas Metal Arc Welding (GMAW) safely.
- analyze and interpret the defects that may be caused when welding with the GMAW process.
- explain the various types of metal transfer.
- analyze problems that may occur when welding with the constant voltage welding machine.
- describe the five essential variables that can be used to control the molten weld pool.
- list shielding gases used for short-circuiting, spray, and pulse-spray transfer.
- interpret how the molten weld pool can be controlled by varying the shielding gas, power setting, and weave pattern.
- explain voltage, amperage, and electrical current as related to GMA welding.
- evaluate completed welds to code specifications.
WELD 334 Gas Metal Arc Welding: Ferrous and Non-Ferrous Metals
- Units:2
- Hours:18 hours LEC; 54 hours LAB
- Prerequisite:WELD 333 with a grade of "C" or better
- Advisory:Eligible for ENGRD 310 or ENGRD 312 and ENGWR 300; or ESLW 340.
- Transferable:CSU
- Catalog Date:August 1, 2024
This course covers semiautomatic wire feed welding using micro wires on aluminum and stainless steel plates of varying thickness. Joint design, gas variations and all welding positions are covered. The emphasis of this course is on code welding aluminum and stainless steels. The content of this course is relevant to code welding in accordance with the American Welding Society (AWS), Structural Aluminum Welding Code D1.2 and Structural Welding Stainless Steel Code D1.6. It also covers welding power supplies, types of metal transfer (spray, globular, pulsed-arc, and short circuit). This course also covers filler metal selection, both specifications and classifications, and shielding gases used for each type of transfer. Welding safety is also covered.
Upon completion of this course, the student will be able to:
- describe safe procedures when using Gas Metal Arc Welding (GMAW) equipment.
- explain the procedure in setting up constant potential or constant voltage power supplies when welding aluminum and stainless steel.
- describe the shielding gases and electrode classifications when welding aluminum and stainless steel.
- demonstrate welding techniques made on groove and fillet welds using various modes of metal transfer.
- explain the significance of the filler metal prefixes.
- interpret the standard filler metal numbering system for aluminum and stainless steel.
- analyze the cause of corrosion in stainless steel welds.
- explain the types of weld heat-affected zones.
- describe the effects of preheating and post heating on stainless steel and aluminum.
- explain the precautions that must be taken when welding stainless steel and aluminum alloys.
- evaluate welds beads made with various shielding gas mixtures.
WELD 335 Flux Core Arc Welding
- Units:3
- Hours:36 hours LEC; 54 hours LAB
- Prerequisite:WELD 300 with a grade of "C" or better, or a minimum of one year of welding experience.
- Transferable:CSU
- Catalog Date:August 1, 2024
This course provides training to develop semi-automatic welding skills on carbon steels. Topics include small and large diameter flux cored electrodes, with and without external shielding gas, in all positions on fillet and groove welds. It also provides a thorough technical understanding of the Flux Core Arc Welding process and arc welding safety.
Upon completion of this course, the student will be able to:
- explain the semi-automatic Flux Core Arc Welding (FCAW) process.
- analyze and interpret the most common weld defects and the causes for each one.
- recognize basic welding symbols and the different weld types and proper placement.
- determine when and why a backing bar and or back gouging is used in structural steel welding.
- examine and evaluate welds for certification and fabrication requirements in accordance with the American Welding Society (AWS) D1.1 Structural Steel Code.
- understand the safety precautions associated with Flux Core Arc Welding.
WELD 342 Symbol Reading, Layout and Fabrication
- Units:3
- Hours:36 hours LEC; 54 hours LAB
- Prerequisite:None.
- Corequisite:WELD 300
- Transferable:CSU
- Catalog Date:August 1, 2024
This course covers blueprint and welding symbol interpretation. It includes metal layout, measurement, marking, and layout tools used in construction, and techniques of fabrication and assembly methods. It also covers fundamentals of blueprint reading, including basic lines and views, dimensions, notes and specifications, structural shapes, sections, detail, and assembly.
Upon completion of this course, the student will be able to:
- interpret working sketches and prints common to metal fabrication.
- analyze concepts and sketching techniques on structural shapes commonly used by welders.
- examine and interpret weld symbols that are represented on drawings.
- locate notes and specifications concerning important details on drawings.
- interpret views on drawings with conventional breaks.
- draw oblique and isometric sketches from orthographic views.
- convert measurements from metric to standard.
WELD 495 Independent Studies in Welding
- Units:1 - 3
- Prerequisite:None.
- Transferable:CSU
- Catalog Date:August 1, 2024
WELD 499 Experimental Offering in Welding
- Units:0.5 - 4
- Prerequisite:None.
- Transferable:CSU
- Catalog Date:August 1, 2024
This is the experimental courses description.
