Engineering Design Technology
Associate Degrees
A.S. in Architectural/Structural Design
This degree is designed for students pursuing employment or upgrade in employment in the fields of building Architectural design utilizing CAD design and drafting applications in architectural, engineering, manufacturing, or construction related offices.
Some students may also pursue four-year degrees in Architecture, Engineering, Manufacturing, Construction, or Project Management.
Engineering Design Technology is studied in lecture and drafting practice classes. Mathematics, science, and engineering fundamentals, which are all related to the content of this program, are studied in the Engineering Design Technology program or through recommended elective courses.
Program Costs: Normal student expenses for textbooks, personal equipment, and supplies are required. These expenses may vary each semester. If these expenses create a financial burden, students should consult the Financial Aid Office for possible assistance.
Recommended High School Preparation: Completion of English and general mathematics. It is desirable, but not required, that a student complete courses in drafting, industrial arts shop courses, one year of algebra, plane geometry, general science, and introduction to computers.
The program is open to all students. For information call (916) 650-2758 or (916) 558-2491.
Catalog Date: August 1, 2024
Degree Requirements
| Course Code | Course Title | Units |
|---|---|---|
| EDT 310 | Technical Graphics With CAD I | 3 |
| EDT 312 | Technical Graphics With CAD II | 3 |
| EDT 316 | REVIT-Architectural | 3 |
| EDT 317 | REVIT-MEP | 3 |
| EDT 318 | Beginning 3D Modeling-CREO | 3 |
| EDT 320 | Architectural/Structural Drafting | 4 |
| A minimum of 6 units from the following: | 6 | |
| EDT 332 | Building Mechanical Design Documents (3) | |
| EDT 336 | Building Mechanical Systems Design (3) | |
| EDT 340 | Plumbing and Piping Systems Design I (3) | |
| EDT 342 | Plumbing and Piping Systems Design II (3) | |
| EDT 352 | Building Electrical Design Documents (3) | |
| EDT 356 | Building Electrical Systems Design (3) | |
| MATH 373 | Trigonometry for Calculus (4) | |
| SURVY 300 | Elementary Surveying (4) | |
| SURVY 310 | Survey Map Production (4) | |
| Total Units: | 25 | |
The Architectural/Structural Design Associate in Science (A.S.) degree may be obtained by completion of the required program, plus general education requirements, plus sufficient electives to meet a 60-unit total. See SCC graduation requirements.
Student Learning Outcomes
Upon completion of this program, the student will be able to:
- prepare architectural plans for buildings using CAD software that conform with current industry standards.
- demonstrate the process of architectural design by applying design principles to building design projects.
- demonstrate application of CAD software programs used by industry in the design process.
- demonstrate proficiency in CAD software programs (AutoCAD, REVIT, and CREO) by preparing 3D computer engineering and architectural models.
Career Information
Depending on their technical field of interest and capabilities, students who complete the program may find employment in any of the following types of jobs: Engineering Aide I, Engineering Aide II, Drafting Aide I, Drafting Aide II, Junior Drafter, Architectural Drafter, Mechanical Drafter/Designer, Electrical Drafter/Designer, Structural Drafter/Designer, Topographical Drafter/Designer, General Construction Drafter/Designer, General Construction Estimator, Computer Aided Drafter, or Technical Sales representatives. Some students may also pursue four-year degrees in Architecture, Engineering, Manufacturing, Construction, or Project Management.
A.S. in Electric (Power-Lighting Systems)
This degree is designed for students pursuing employment or upgrade in employment in the fields of (1) building Electrical power and lighting systems design or (2) mechanical component design utilizing 2D and 3D CAD design and drafting software applications in architectural, engineering, manufacturing, or construction related offices.
Some students may also pursue four-year degrees in Architecture, Engineering, Manufacturing, Construction, or Project Management.
Engineering Design Technology is studied in lecture and drafting practice classes. Mathematics, science, and engineering fundamentals, which are all related to the content of this program, are studied in the Engineering Design Technology program or through recommended elective courses. General Education courses complete the recommended classes for the Engineering Design Technology curriculum.
Program Costs: Normal student expenses for textbooks, personal equipment, and supplies are required. These expenses may vary each semester. If these expenses create a financial burden, students should consult the Financial Aid Office for possible assistance.
Recommended High School Preparation: Completion of English and general mathematics. It is desirable, but not required, that a student complete courses in drafting, industrial arts shop courses, one year of algebra, plane geometry, general science, and introduction to computers.
The program is open to all students. For information call (916) 650-2758 or (916) 558-2491.
Catalog Date: August 1, 2024
Degree Requirements
| Course Code | Course Title | Units |
|---|---|---|
| EDT 310 | Technical Graphics With CAD I | 3 |
| EDT 312 | Technical Graphics With CAD II | 3 |
| EDT 316 | REVIT-Architectural | 3 |
| EDT 317 | REVIT-MEP | 3 |
| EDT 318 | Beginning 3D Modeling-CREO | 3 |
| EDT 352 | Building Electrical Design Documents | 3 |
| EDT 356 | Building Electrical Systems Design | 3 |
| A minimum of 6 units from the following: | 6 | |
| EDT 320 | Architectural/Structural Drafting (4) | |
| EDT 332 | Building Mechanical Design Documents (3) | |
| EDT 336 | Building Mechanical Systems Design (3) | |
| EDT 340 | Plumbing and Piping Systems Design I (3) | |
| EDT 342 | Plumbing and Piping Systems Design II (3) | |
| MATH 373 | Trigonometry for Calculus (4) | |
| SURVY 300 | Elementary Surveying (4) | |
| SURVY 310 | Survey Map Production (4) | |
| Total Units: | 27 | |
The Electric (Power-Lighting Systems) Associate in Science (A.S.) degree may be obtained by completion of the required program, plus general education requirements, plus sufficient electives to meet a 60-unit total. See SCC graduation requirements.
Student Learning Outcomes
Upon completion of this program, the student will be able to:
- perform design calculations and prepare electrical plans for building electrical systems that conform with current industry and ANSI standards.
- demonstrate the process of electrical design by applying design principles to building design projects.
- demonstrate proficiency in CAD software programs (AutoCAD, REVIT and CREO) by preparing 3D computer engineering and architectural models.
- demonstrate the processes of rapid prototyping of components represented by 3D computer engineering and architectural models.
Career Information
This program is designed for students pursuing entry level employment in architectural, electrical, and mechanical engineering, and commercial construction drafting fields. Some students may also pursue four-year degrees in Architecture, Engineering, Construction, or Project Management. Depending on their technical field of interest and capabilities, students who complete the program may find employment in any of the following types of jobs: Engineering Aide I, Engineering Aide II, Drafting Aide I, Drafting Aide II, Junior Drafter, Architectural Drafter, Mechanical Drafter/Designer Trainee, Electrical Drafter/Designer Trainee, Structural Drafter/Designer Trainer, Topographical Drafter/Designer Trainee, General Construction Drafter/Designer Trainee, General Construction Estimator Trainee, Computer Aided Drafter, or Technical Sales representatives.
A.S. in Engineering Design Technology
This degree is designed for students pursuing employment or upgrade in employment in the fields of component design or building design utilizing CAD drafting applications in architectural, engineering, manufacturing, or construction related offices.
Some students may also pursue four-year degrees in Architecture, Engineering, Construction, or Project Management.
Engineering Design Technology is studied in lecture and drafting practice classes. Mathematics, science, and engineering fundamentals, which are all related to the content of this program, are studied in the Engineering Design Technology program or through recommended elective courses. General Education courses complete the recommended classes for the Engineering Design Technology curriculum.
Program Costs: Normal student expenses for textbooks, personal equipment, and supplies are required. These expenses may vary each semester. If these expenses create a financial burden, students should consult the Financial Aid Office for possible assistance.
Recommended High School Preparation: Completion of English and general mathematics. It is desirable, but not required, that a student complete courses in drafting, industrial arts shop courses, one year of algebra, plane geometry, general science, and introduction to computers.
The program is open to all students. For information call (916) 650-2758 or 558-2491.
Transfer Students: Students who, after completing this program, are planning to continue specialization in this field by transferring to a four-year college, should consult the Requirements of Transfer Institutions section in this catalog and the engineering or related major sections of the specific catalog for the institution to which they wish to transfer. Consultation with an SCC counselor is advised.
Catalog Date: August 1, 2024
Degree Requirements
| Course Code | Course Title | Units |
|---|---|---|
| EDT 310 | Technical Graphics With CAD I | 3 |
| EDT 312 | Technical Graphics With CAD II | 3 |
| EDT 316 | REVIT-Architectural | 3 |
| EDT 317 | REVIT-MEP | 3 |
| EDT 318 | Beginning 3D Modeling-CREO | 3 |
| EDT 320 | Architectural/Structural Drafting | 4 |
| EDT 332 | Building Mechanical Design Documents | 3 |
| EDT 336 | Building Mechanical Systems Design | 3 |
| EDT 340 | Plumbing and Piping Systems Design I | 3 |
| EDT 342 | Plumbing and Piping Systems Design II | 3 |
| EDT 352 | Building Electrical Design Documents | 3 |
| EDT 356 | Building Electrical Systems Design | 3 |
| Total Units: | 37 |
The Engineering Design Technology Associate in Science (A.S.) degree may be obtained by completion of the required program, plus general education requirements, plus sufficient electives to meet a 60-unit total. See SCC graduation requirements.
Student Learning Outcomes
Upon completion of this program, the student will be able to:
- prepare architectural, mechanical, and electrical plans for buildings that conform with current industry and ANSI standards.
- demonstrate the processes of building architectural, mechanical, and electrical design by applying design principles to building design projects.
- demonstrate proficiency in CAD software programs (AutoCAD, REVIT, and CREO) by preparing 3D computer engineering and architectural models.
- demonstrate the processes of rapid prototyping of components represented by 3D computer engineering and architectural models.
Career Information
This program is designed for students pursuing entry level employment in Architecture, Electrical and Mechanical Engineering, and commercial construction drafting fields. Depending on their technical field of interest and capabilities, students who complete the program may find employment in any of the following types of jobs: Engineering Aide I, Engineering Aide II, Drafting Aide I, Drafting Aide II, Junior Drafter, Architectural Drafter, Mechanical Drafter/Designer Trainee, Electrical Drafter/Designer Trainee, Structural Drafter/Designer Trainer, Topographical Drafter/Designer Trainee, General Construction Drafter/Designer Trainee, General Construction Estimator Trainee, Computer Aided Drafter, or Technical Sales representatives. Some students may also pursue four-year degrees in Architecture, Engineering, Construction, or Project Management.
A.S. in Mechanical (HVAC/Piping/Plumbing Systems)
This degree is designed for students pursuing employment or upgrade in employment in the fields of (1) building Mechanical design (Heating, Ventilation, and Air Conditioning HVAC, Plumbing and Piping or (2) mechanical component design utilizing 2D and 3D CAD design and drafting software applications in architectural, engineering, manufacturing, or construction related offices.
Some students may also pursue four-year degrees in Architecture, Engineering, Manufacturing, Construction, or Project Management.
Engineering Design Technology is studied in lecture and drafting practice classes. Mathematics, science, and engineering fundamentals, which are all related to the content of this program, are studied in the Engineering Design Technology program or through recommended elective courses. General Education courses complete the recommended classes for the Engineering Design Technology curriculum.
Program Costs: Normal student expenses for textbooks, personal equipment and supplies are required. These expenses may vary each semester. If these expenses create a financial burden, students should consult the Financial Aid Office for possible assistance.
Recommended High School Preparation: Completion of English and general mathematics. It is desirable, but not required, that a student complete courses in drafting, industrial arts shop courses, one year of algebra, plane geometry, general science, and introduction to computers.
The program is open to all students. For information call (916) 650-2758 or (916) 558-2491.
Catalog Date: August 1, 2024
Degree Requirements
| Course Code | Course Title | Units |
|---|---|---|
| EDT 310 | Technical Graphics With CAD I | 3 |
| EDT 312 | Technical Graphics With CAD II | 3 |
| EDT 316 | REVIT-Architectural | 3 |
| EDT 317 | REVIT-MEP | 3 |
| EDT 318 | Beginning 3D Modeling-CREO | 3 |
| EDT 332 | Building Mechanical Design Documents | 3 |
| EDT 336 | Building Mechanical Systems Design | 3 |
| EDT 340 | Plumbing and Piping Systems Design I | 3 |
| EDT 342 | Plumbing and Piping Systems Design II | 3 |
| A minimum of 5 units from the following: | 5 | |
| EDT 320 | Architectural/Structural Drafting (4) | |
| EDT 352 | Building Electrical Design Documents (3) | |
| EDT 356 | Building Electrical Systems Design (3) | |
| MATH 373 | Trigonometry for Calculus (4) | |
| SURVY 300 | Elementary Surveying (4) | |
| SURVY 310 | Survey Map Production (4) | |
| Total Units: | 32 | |
The Mechanical (HVAC/Piping/Plumbing Systems) Associate in Science (A.S.) degree may be obtained by completion of the required program, plus general education requirements, plus sufficient electives to meet a 60-unit total. See SCC graduation requirements.
Student Learning Outcomes
Upon completion of this program, the student will be able to:
- perform design calculations and prepare mechanical and plumbing plans for building mechanical and plumbing systems that conform with current industry and ANSI standards.
- demonstrate the processes of mechanical and plumbing design by applying design principles to building design projects.
- demonstrate proficiency in CAD software programs (AutoCAD, REVIT, and CREO) by preparing 3D computer engineering and architectural models.
- demonstrate the processes of rapid prototyping of components represented by 3D computer engineering and architectural models.
Career Information
This program is designed for students pursuing entry level employment in architecture, electrical and mechanical engineering, and commercial construction fields. Depending on their technical field of interest and capabilities, students who complete the program may find employment in any of the following types of jobs: Engineering Aide I, Engineering Aide II, Drafting Aide I, Drafting Aide II, Junior Drafter, Architectural Drafter, Mechanical Drafter/Designer Trainee, Electrical Drafter/Designer Trainee, Structural Drafter/Designer Trainer, Topographical Drafter/Designer Trainee, General Construction Drafter/Designer Trainee, General Construction Estimator Trainee, Computer Aided Drafter, or Technical Sales representatives. Some students may also pursue four-year degrees in Architecture, Engineering, Construction or Project Management.
Certificates of Achievement
Architectural/Structural Design Certificate
This Certificate of Achievement is designed for students pursuing employment or upgrade in employment in the fields of building Architectural design utilizing CAD design and drafting applications in architectural, engineering, manufacturing, or construction related offices.
Engineering Design Technology is studied in lecture and drafting practice classes. Mathematics, science, and engineering fundamentals, which are all related to the content of this program, are studied in the Engineering Design Technology program or through recommended elective courses.
Program Costs: Normal student expenses for textbooks, personal equipment, and supplies are required. These expenses may vary each semester. If these expenses create a financial burden, students should consult the Financial Aid Office for possible assistance.
Recommended High School Preparation: Completion of English and general mathematics. It is desirable, but not required, that a student complete courses in drafting, industrial arts shop courses, one year of algebra, plane geometry, general science, and introduction to computers.
The program is open to all students. For information call (916) 650-2758 or (916) 558-2491.
Catalog Date: August 1, 2024
Certificate Requirements
| Course Code | Course Title | Units |
|---|---|---|
| EDT 310 | Technical Graphics With CAD I | 3 |
| EDT 312 | Technical Graphics With CAD II | 3 |
| EDT 316 | REVIT-Architectural | 3 |
| EDT 317 | REVIT-MEP | 3 |
| EDT 318 | Beginning 3D Modeling-CREO | 3 |
| EDT 320 | Architectural/Structural Drafting | 4 |
| A minimum of 6 units from the following: | 6 | |
| EDT 332 | Building Mechanical Design Documents (3) | |
| EDT 336 | Building Mechanical Systems Design (3) | |
| EDT 340 | Plumbing and Piping Systems Design I (3) | |
| EDT 342 | Plumbing and Piping Systems Design II (3) | |
| EDT 352 | Building Electrical Design Documents (3) | |
| EDT 356 | Building Electrical Systems Design (3) | |
| MATH 373 | Trigonometry for Calculus (4) | |
| SURVY 300 | Elementary Surveying (4) | |
| SURVY 310 | Survey Map Production (4) | |
| Total Units: | 25 | |
Student Learning Outcomes
Upon completion of this program, the student will be able to:
- prepare architectural plans for buildings using CAD software that conform with current industry standards.
- demonstrate the process of architectural design by applying design principles to building design projects.
- demonstrate application of CAD software programs used by industry in the design process.
- demonstrate proficiency in CAD software programs (AutoCAD, REVIT, and CREO) by preparing 3D computer engineering and architectural models.
Career Information
This program is designed for students pursuing entry level employment in architectural, electrical and mechanical engineering, and commercial construction drafting fields. Depending on their technical field of interest and capabilities, students who complete the program may find employment in any of the following types of jobs: Engineering Aide I, Engineering Aide II, Drafting Aide I, Drafting Aide II, Junior Drafter, Architectural Drafter, Mechanical Drafter/Designer Trainee, Electrical Drafter/Designer Trainee, Structural Drafter/Designer Trainer, Topographical Drafter/Designer Trainee, General Construction Drafter/Designer Trainee, General Construction Estimator Trainee, Computer Aided Drafter, or Technical Sales representatives.
CAD Technology Certificate
This certificate is designed for students pursuing employment or upgrade in employment in fields that utilize CAD software to perform design, modeling, and drafting, including but not limited to: architecture, engineering, manufacturing, research and construction.
Program Costs: Normal student expenses for textbooks, personal equipment, and supplies are required. These expenses may vary each semester. If these expenses create a financial burden, students should consult the Financial Aid Office for possible assistance.
Recommended High School Preparation: Completion of English and general mathematics. It is desirable, but not required, that a student complete courses in drafting, industrial arts, one year of algebra, plane geometry, general science, and introduction to computers.
The program is open to all students. For information call (916) 650-2758 or (916) 558-2491.
Catalog Date: August 1, 2024
Certificate Requirements
| Course Code | Course Title | Units |
|---|---|---|
| EDT 310 | Technical Graphics With CAD I | 3 |
| EDT 312 | Technical Graphics With CAD II | 3 |
| EDT 315 | Beginning 3D Modeling-SolidWorks | 3 |
| EDT 316 | REVIT-Architectural | 3 |
| EDT 317 | REVIT-MEP | 3 |
| EDT 318 | Beginning 3D Modeling-CREO | 3 |
| EDT 319 | Advanced 3D Modeling/Rapid Prototyping | 3 |
| Total Units: | 21 |
Student Learning Outcomes
Upon completion of this program, the student will be able to:
- use CAD and modeling software to the fields of architecture and engineering design, modeling, manufacturing, and construction.
- utilize CAD and modeling software to prepare computer models and design drawings of architectural and engineering related projects.
Career Information
This certificate is designed for students pursuing entry-level employment or upgrade in employment in fields that utilize CAD software to perform design, modeling and drafting, including but not limited to: Architecture, Engineering, Manufacturing, Research, and Construction. Depending on their technical field of interest and capabilities, students who complete the certificate may find employment in any of the following types of jobs: Engineering Aide I, Engineering Aide II, Drafting Aide I, Drafting Aide II, Junior Drafter, Architectural Drafter, Mechanical Drafter/Designer Trainee, Electrical Drafter/Designer Trainee, Structural Drafter/Designer Trainee, Topographical Drafter/Designer Trainee, General Construction Drafter/Designer Trainee, General Construction Estimator Trainee, Computer Aided Drafter, or Technical Sales representatives.
Electric (Power-Lighting Systems) Certificate
This Certificate of Achievement is designed for students pursuing employment or upgrade in employment in the fields of (1) building Electrical power and lighting systems design or (2) mechanical component design utilizing 2D and 3D CAD design and drafting software applications in architectural, engineering, manufacturing, or construction related offices.
Engineering Design Technology is studied in lecture and drafting practice classes. Mathematics, science, and engineering fundamentals, which are all related to the content of this program, are studied in the Engineering Design Technology program or through recommended elective courses.
Program Costs: Normal student expenses for textbooks, personal equipment, and supplies are required. These expenses may vary each semester. If these expenses create a financial burden, students should consult the Financial Aid Office for possible assistance.
Recommended High School Preparation: Completion of English and general mathematics. It is desirable, but not required, that a student complete courses in drafting, industrial arts shop courses, one year of algebra, plane geometry, general science, and introduction to computers.
The program is open to all students. For information call (916) 650-2758 or (916) 558-2491.
Catalog Date: August 1, 2024
Certificate Requirements
| Course Code | Course Title | Units |
|---|---|---|
| EDT 310 | Technical Graphics With CAD I | 3 |
| EDT 312 | Technical Graphics With CAD II | 3 |
| EDT 316 | REVIT-Architectural | 3 |
| EDT 317 | REVIT-MEP | 3 |
| EDT 318 | Beginning 3D Modeling-CREO | 3 |
| EDT 352 | Building Electrical Design Documents | 3 |
| EDT 356 | Building Electrical Systems Design | 3 |
| A minimum of 6 units from the following: | 6 | |
| EDT 320 | Architectural/Structural Drafting (4) | |
| EDT 332 | Building Mechanical Design Documents (3) | |
| EDT 336 | Building Mechanical Systems Design (3) | |
| EDT 340 | Plumbing and Piping Systems Design I (3) | |
| EDT 342 | Plumbing and Piping Systems Design II (3) | |
| MATH 373 | Trigonometry for Calculus (4) | |
| SURVY 300 | Elementary Surveying (4) | |
| SURVY 310 | Survey Map Production (4) | |
| Total Units: | 27 | |
Student Learning Outcomes
Upon completion of this program, the student will be able to:
- perform design calculations and prepare electrical plans for building electrical systems that conform with current industry and ANSI standards.
- demonstrate the process of building electrical design by applying design principles to building design projects.
- demonstrate proficiency in CAD software programs (AutoCAD, REVIT and CREO) by preparing 3D computer engineering and architectural models.
- demonstrate the processes of rapid prototyping of components represented by 3D computer engineering and architectural models.
Career Information
This program is designed for students pursuing entry level employment in architectural, electrical and mechanical engineering, manufacturing, or commercial construction fields. Depending on their technical field of interest and capabilities, students who complete the program may find employment in any of the following types of jobs: Engineering Aide I, Engineering Aide II, Drafting Aide I, Drafting Aide II, Junior Drafter, Architectural Drafter, Mechanical Drafter/Designer Trainee, Electrical Drafter/Designer Trainee, Structural Drafter/Designer Trainer, Topographical Drafter/Designer Trainee, General Construction Drafter/Designer Trainee, General Construction Estimator Trainee, Computer Aided Drafter, or Technical Sales representatives.
Engineering Design Technology Certificate
This Certificate of Achievement is designed for students pursuing employment or upgrade in employment in the fields of building design utilizing CAD drafting applications in architectural, engineering, manufacturing, or construction related offices.
Engineering Design Technology is studied in lecture and computer-aided drafting practice classes. Mathematics, science, and engineering fundamentals, which are all related to the content of this program, are studied in the Engineering Design Technology program or through recommended elective courses. General Education courses complete the recommended classes for the Engineering Design Technology curriculum.
Program Costs: Normal student expenses for textbooks, personal equipment, and supplies are required. These expenses may vary each semester. If these expenses create a financial burden, students should consult the Financial Aid Office for possible assistance.
Recommended High School Preparation: Completion of English and general mathematics. It is desirable, but not required, that a student complete courses in drafting, industrial arts shop courses, one year of algebra, plane geometry, general science, and introduction to computers.
The program is open to all students. For information call (916) 650-2758 or (916) 558-2491.
Catalog Date: August 1, 2024
Certificate Requirements
| Course Code | Course Title | Units |
|---|---|---|
| EDT 310 | Technical Graphics With CAD I | 3 |
| EDT 312 | Technical Graphics With CAD II | 3 |
| EDT 316 | REVIT-Architectural | 3 |
| EDT 317 | REVIT-MEP | 3 |
| EDT 318 | Beginning 3D Modeling-CREO | 3 |
| EDT 320 | Architectural/Structural Drafting | 4 |
| EDT 332 | Building Mechanical Design Documents | 3 |
| EDT 336 | Building Mechanical Systems Design | 3 |
| EDT 340 | Plumbing and Piping Systems Design I | 3 |
| EDT 342 | Plumbing and Piping Systems Design II | 3 |
| EDT 352 | Building Electrical Design Documents | 3 |
| EDT 356 | Building Electrical Systems Design | 3 |
| Total Units: | 37 |
Student Learning Outcomes
Upon completion of this program, the student will be able to:
- prepare architectural, mechanical, and electrical plans for buildings that conform with current industry and ANSI standards.
- demonstrate the process of building architectural, mechanical, and electrical design by applying design principles to building design projects.
- demonstrate proficiency in CAD software programs (AutoCAD, REVIT and CREO) by preparing 3D computer engineering and architectural models.
- explain the processes of rapid prototyping of components represented by 3D computer engineering and architectural models.
Career Information
This program is designed for students pursuing entry level employment in architectural, electrical, mechanical, and commercial construction drafting and design fields. Depending on their technical field of interest and capabilities, students who complete the program may find employment in any of the following types of jobs: Engineering Aide I, Engineering Aide II, Drafting Aide I, Drafting Aide II, Junior Drafter, Architectural Drafter, Mechanical Drafter/Designer Trainee, Electrical Drafter/Designer Trainee, Structural Drafter/Designer Trainer, Topographical Drafter/Designer Trainee, General Construction Drafter/Designer Trainee, General Construction Estimator Trainee, Computer Aided Drafter, or Technical Sales representatives.
Mechanical (HVAC/Piping/Plumbing Systems) Certificate
This Certificate of Achievement is designed for students pursuing employment or upgrade in employment in the fields of (1) building Mechanical design (Heating, Ventilation, and Air Conditioning HVAC, Plumbing and Piping or (2) mechanical component design utilizing 2D and 3D CAD design and drafting software applications in architectural, engineering, manufacturing, or construction related offices.
Engineering Design Technology is studied in lecture and drafting practice classes. Mathematics, science, and engineering fundamentals, which are all related to the content of this program, are studied in the Engineering Design Technology program or through recommended elective courses. General Education courses complete the recommended classes for the Engineering Design Technology curriculum.
Program Costs: Normal student expenses for textbooks, personal equipment, and supplies are required. These expenses may vary each semester. If these expenses create a financial burden, students should consult the Financial Aid Office for possible assistance.
Recommended High School Preparation: Completion of English and general mathematics. It is desirable, but not required, that a student complete courses in drafting, industrial arts shop courses, one year of algebra, plane geometry, general science, and introduction to computers.
The program is open to all students. For information call (916) 650-2758 or (916) 558-2491.
Catalog Date: August 1, 2024
Certificate Requirements
| Course Code | Course Title | Units |
|---|---|---|
| EDT 310 | Technical Graphics With CAD I | 3 |
| EDT 312 | Technical Graphics With CAD II | 3 |
| EDT 316 | REVIT-Architectural | 3 |
| EDT 317 | REVIT-MEP | 3 |
| EDT 318 | Beginning 3D Modeling-CREO | 3 |
| EDT 332 | Building Mechanical Design Documents | 3 |
| EDT 336 | Building Mechanical Systems Design | 3 |
| EDT 340 | Plumbing and Piping Systems Design I | 3 |
| EDT 342 | Plumbing and Piping Systems Design II | 3 |
| A minimum of 5 units from the following: | 5 | |
| EDT 320 | Architectural/Structural Drafting (4) | |
| EDT 352 | Building Electrical Design Documents (3) | |
| EDT 356 | Building Electrical Systems Design (3) | |
| MATH 373 | Trigonometry for Calculus (4) | |
| SURVY 300 | Elementary Surveying (4) | |
| SURVY 310 | Survey Map Production (4) | |
| Total Units: | 32 | |
Student Learning Outcomes
Upon completion of this program, the student will be able to:
- perform design calculations and prepare mechanical and plumbing plans for building mechanical and plumbing systems that conform with current industry and ANSI standards.
- demonstrate the processes of mechanical and plumbing design by applying design principles to building design projects.
- demonstrate proficiency in CAD software programs (AutoCAD, REVIT, and CREO) by preparing 3D computer engineering and architectural models.
- demonstrate the processes of rapid prototyping of components represented by 3D computer engineering and architectural models.
Career Information
This program is designed for students pursuing entry level employment in Architecture, Electrical and Mechanical Engineering, Manufacturing, and commercial construction fields. Depending on their technical field of interest and capabilities, students who complete the program may find employment in any of the following types of jobs: Engineering Aide I, Engineering Aide II, Drafting Aide I, Drafting Aide II, Junior Drafter, Architectural Drafter, Mechanical Drafter/Designer Trainee, Electrical Drafter/Designer Trainee, Structural Drafter/Designer Trainer, Topographical Drafter/Designer Trainee, General Construction Drafter/Designer Trainee, General Construction Estimator Trainee, Computer Aided Drafter, or Technical Sales representatives.
Science, Math and Engineering
This program is part of the Science, Math and Engineering meta major.