Industrial Systems Technology, Diploma (IST4) (470303)  Diploma


Campus Locations: Tifton, Moultrie (Industrial Drive) , Bainbridge

The Industrial Systems Technology Diploma program is designed for the student who wishes to prepare for a career as an Industrial Systems technician/electrician. The program provides learning opportunities that introduce, develop and reinforce academic and technical knowledge, skill, and attitudes required for job acquisition, retention, and advancement. Additionally, the program provides opportunities to retrain or upgrade present knowledge and skill. The diploma program teaches skills in Industrial Systems Technology providing background skills in several areas of industrial maintenance including electronics, industrial wiring, motors, controls, PLC's, instrumentation, fluidpower, mechanical, pumps and piping, and computers. Graduates of the program receive an Industrial Systems Technology Diploma that qualifies them for employment as industrial electricians or industrial systems technicians.

Length of Program: Five (5) Semesters

Entrance Dates: Beginning of each semester.

Entrance Requirements: Refer to Admissions criteria. Click for Entrance Score Requirements.

Age: Applicant must be 16 years of age or older.

Education: An applicant must be a high school graduate or the equivalent (GED). College transcripts will be evaluated on an individual basis.

Advisor: A Program Advisor should be consulted prior to enrolling in any course. An advisor will be assigned by admissions.

Program Final Exit Point: Industrial Systems Technology, Diploma.

Credits Required for Graduation: 49 minimum semester hour credits required for graduation.

Cost
Books: $440.00
Fees: $301.00
Tuition: $1,200.00
Total: $1,941.00
Books: $350.00
Fees: $301.00
Tuition: $1,500.00
Total: $2,151.00
Books: $150.00
Fees: $301.00
Tuition: $1,500.00
Total: $1,951.00
Books: $348.20
Fees: $301.00
Tuition: $1,500.00
Total: $2,149.20
Curriculum Outline (49 hours)
1: Basic Skills Courses (8 Hours) 8
Select one of the following courses (3 Hours): 3
And one of the following (2 Hours) 2
EMPL 1000

Pre-requisite(s): Program Admission Emphasizes human relations and professional development in today's rapidly changing world that prepares students for living and working in a complex society. Topics include human relations skills, job acquisition skills and communication, job retention skills, job advancement skills, and professional image skills, personal finance, problem solving, and diversity.

2
PSYC 1010

Pre-requisite(s): Entrance exam reading and writing scores in accordance with approved TCSG admission score levels Presents basic concepts within the field of psychology and their application to everyday human behavior, thinking, and emotion. Emphasis is placed on students understanding basic psychological principles and their application within the context of family, work and social interactions. Topics include an overview of psychology as a science, the nervous and sensory systems, learning and memory, motivation and emotion, intelligence, lifespan development, personality, psychological disorders and their treatments, stress and health, and social psychology.

3
And one of the following (3 Hours) 3
MATH 1012

Emphasizes the application of basic mathematical skills used in the solution of occupational and technical problems. Topics include fractions, decimals, percents, ratios and proportions, measurement and conversion, geometric concepts, technical applications, and basic statistics.

3
MATH 1013

Emphasizes concepts and operations which are applied to the study of algebra. Topics include basic mathematical concepts, basic algebraic concepts, and intermediate algebraic concepts.

3
2: Institutional Credit (3 hours) 3
COLL 1500

This course is designed to provide tools to assist students to acquire skills necessary to achieve academic and professional success in their chosen occupational/ technical program of study. Topics include: Getting off to a Good Start, Learning and Personality Styles, Time and Money Management, Study and Test Taking Skills, Stress Management and Wellness, Communications Skills, Career Exploration, Research Skills, College Campus Knowledge, Memory & Reading Skills, Presentation & Interview Skills, and Group Skills. Effective Fall 2016, students who already have an Associate Degree or higher will be given exemption credit for the COLL 1500 course.

3
3: Occupational Courses (38 Hours) 38
IDSY 1110

This course introduces the fundamental concepts, principles, and devices involved in industrial motor controls,theories and applications of single and three-phase motors, wiring motor control circuits, and magnetic starters and braking. Topics include, but are not limited to, motor theory and operating principles, control devices, symbols and schematic diagrams, NEMA standards, Article 430 NEC and preventative maintenance and troubleshooting.

4
IDSY 1120

This course introduces the operational theory, systems terminology, PLC installation, and programming procedures for Programmable Logic Controllers. Emphasis is placed on PLC programming, connections, installation, and start-up procedures. Other topics include timers and counters, relay logic instructions, and hardware and software applications.

4
IDSY 1130

Teaches the fundamental concepts of industrial wiring with an emphasis on installation procedures. Topics include: grounding, raceways, three-phase systems, transformers (three-phase and single-phase), wire sizing, overcurrent protection, NEC requirements, industrial lighting systems, and switches, receptacles, and cord connectors.

4
IDSY 1170

This course introduces and emphasizes the basic skill necessary for mechanical maintenance personnel. Instruction is also provided in the basic physics concepts applicable to the mechanics of industrial production equipment, and the application of mechanical principles with additional emphasis on power transmission and specific mechanical components.

4
IDSY 1190

This course provides instruction in the fundamentals of safely operating hydraulic, pneumatic, and pump and piping systems. Theory and practical application concepts are discussed. Topics include hydraulic system principles and components, pneumatic system principles and components, and the installation, maintenance, and troubleshooting of pump and piping systems.

4
IDSY 1195

This course provides instruction on the fundamentals concepts of industrial pumps and piping systems. Topics include: pump identification, pump operation, installation, maintenance and troubleshooting, piping systems and installation of piping systems.

3
IDSY 1210

This course introduces the theory and practical application for two-wire control circuits, advanced motor controls, and variable speed motor controls. Emphasis is placed on circuit sequencing, switching, and installation, maintenance, and troubleshooting techniques.

4
IDSY 1220

This course provides for hands on development of operational skills in the maintenance and troubleshooting of industrial control systems and automated equipment. Topics include data manipulation, math instructions, introduction to HMI, analog control, and troubleshooting discrete IO devices.

4
XXXX xxxx - Occupational Electives (IDSY, AIRC, CIST, COMP, ELCR, WELD) 9
And one of the following (3 Hours) 3
IDFC 1011

Pre/Co-requisite(s): Provisional Admission Introduces direct current (DC) concepts and applications. Topics include: electrical principles and laws; batteries; DC test equipment; series, parallel, and simple combination circuits; and laboratory procedures and safety practices.

3
IDSY 1101

This course introduces direct current (DC) concepts and applications. Topics include: electrical principles and laws; batteries; DC test equipment; series, parallel, and simple combination circuits; and laboratory procedures and safety procedures.

3
And one of the following (3 Hours) 3
ELTR 1020

Introduces the theory and application of varying sine wave voltages and current. Topics include: magnetism, AC wave generation, AC test equipment, inductance, capacitance, and basic transformers.

3
IDFC 1012

This course introduces the theory and application of varying sine wave voltages and current. Topics include: magnetism, AC wave generation, AC test equipment, inductance, capacitance, and basic transformers.

3
IDSY 1105

This course introduces alternating current concepts, theory, and application of varying sine wave voltages and current, and the physical characteristics and applications of solid state devices. Topics include, but are not limited to: electrical laws and principles, magnetism, inductance and capacitance.

3
Faculty
Program Chair

Manufacturing Operations Lab Manager
School of Industrial Technology
Thomasville

15689 U.S. 19, Thomasville, GA 31792
Advisor

Manufacturing Operations and Engineering Faculty
School of Industrial Technology
Thomasville

15689 U.S. 19, Thomasville, GA 31792
Advisor

Industrial Systems Technology Faculty
School of Industrial Technology
Tifton

52 Tech Drive, Tifton, GA 31794
Up one level
Programs of Study