Lincoln Tech - East Windsor

The Heating, Ventilation, Air Conditioning and Refrigeration field anticipates high demand for skilled technicians according to the U.S Department of Labor’s Bureau of Labor Statistics. This program ensures that students are skilled in the operation, design, installation, troubleshooting and repair of air conditioning, refrigeration, heating and ventilation equipment for today and the future.

Students enrolled in this program will obtain instruction and demonstrate skills and knowledge in construction safety, measuring and blueprint reading, calculations of ductwork & heating systems with an emphasis on both heat loss and heat gain heating and cooling calculations. Students are also instructed on domestic and commercial refrigeration systems, and gas, oil and electric heating of both water and steam. The systems that control indoor climate are constantly evolving to reflect technological advancements and environmental concerns and Lincoln students will be prepared to meet the evolution.

Students will receive both classroom and lab learning opportunities simulating real-world applications.

Students are trained in the installation and repair of refrigeration, heating, and cooling mechanical and electrical control systems of both residential homes and commercial buildings. In addition, students receive instruction in energy efficiency, renewable energy, as well as energy conservation practices, energy auditing techniques and system performance verification of heating and cooling equipment.

Upon completion of this program, graduates can expect to meet the essential entry level skills and knowledge required of an HVAC technician. With additional experience graduates may pursue opportunities allowing them to work independently, without direct supervision; supervise crews or teams of other technicians; or start their own business. Graduates may also choose to specialize in one or more specific areas of the HVAC market including refrigeration, air conditioning, and heating.

Students will be required to complete out-of-class assignments in each course.

This is a comprehensive program that prepares a student to enter the Electrical field. A foundation of Basic Math and Electrical Trade Algebra and Trigonometry prepare the student for Electrical theory and concepts. The program continues with Blue Print reading, an essential skill required of a licensed Electrician. Each course in the program is an important component of knowledge needed in the Electrical Industry. The National Electrical Code is covered thoroughly in four separate courses in which each article in the NEC is reviewed. Courses such as Motor Control, Power Distribution, PLC’s 1 and 2 and Motor Generator Theory prepare the student for Commercial and Industrial installations. Basic Telecommunications and Cabling include voice, data, wireless, network and broadband technologies. Two Solar Energy courses introduce the student to the growing field of green technology. Semi-Conductors for Electricians prepares the student for new complex technologies that are being developed and implanted at faster and faster rates.

The Lab portions of our program train the student on basic but essential hands on skills that are needed upon entrance in the Electrical Field. These hands on skills combined with our extensive classroom courses prepare the Graduate for a successful and rewarding career in the Electrical Industry. Students will also be trained on OSHA 30 standards and given the opportunity to take and pass the exam. OSHA 30 certification is mandated by the State licensing board for all apprentices. An apprentice needs to have his or her OSHA 30 certification in order to seek qualification for future licensure. Upon successful completion of the program the State of Connecticut mandated 720 hours of classroom study is satisfied.

Students will be required to complete out-of-class assignments in each course.

The Welding Technology program prepares students for entry level welder positions as structural and pipe welders. Students develop key fundamental skills during the initial courses and learn to apply these skills using different and more complex welding procedures. The welding procedures include Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW/MIG), Flux Core Arc Welding (FCAW), and Gas Tungsten Arc Gas Welding (GTAW/TIG). Using each of these procedures, students learn to weld plate and pipe in various positions including horizontal, vertical, and overhead. Students also learn various techniques for cutting and preparing metal for welding procedures. Upon successful completion of all components of this program, the graduate should possess the working knowledge and skills to qualify as a structural and/or pipe welder using any one of three standard welding processes in construction, fabrication, or plant maintenance work settings. Students should be able to successfully complete pre-qualification tests for any construction structural or pipe related projects. Maximum shop/lab size: 20 students per instructor. Students will be required to complete out-of-class assignment in each course.

Provide the graduate with the entry-level knowledge and skills required to correctly test, replace, repair and adjust automobile: basic gasoline engines, electrical charging, starting and lighting systems, brake, steering, suspension, air conditioning, and electrical accessory systems. Upon completion of the program, graduates will be qualified for entry into the automotive service career field as a mechanic capable of performing most common service operations in the systems listed and with supervision may perform more complex tasks.Students will be required to complete out-of-class assignments in each course.

Provide the graduate with the entry-level knowledge and skills required to correctly test, diagnose, replace, repair and adjust as necessary the components of the mechanical, electronic, hydraulic, and accessories systems on current automobiles. Upon completion of this program, the graduates will be qualified for entry into the automotive service career field as a technician capable of analysis, problem solving, performing most common ser¬vice operations and under supervision, more specialized or involved tasks with a dealer, inde¬pendent shop or other service outlet. Students will be required to complete out-of-class assignments in each course.

Provide the graduate with the entry-level knowledge and skills required to correctly test, diagnose, replace, repair and adjust as necessary the components of the mechanical, electronic, hydraulic, and accessories systems on current automobiles. Upon completion of this program, the graduates will be qualified for entry into the automotive service career field as a technician capable of analysis, problem solving, performing most common service operations and under supervision, more specialized or involved tasks with a dealer, independent shop or other service outlet. Students will be required to complete out-of-class assignments in each course.

This program is designed to provide the student with a comprehensive understanding and hands-on application of industry standard collision repair and refinishing techniques. The program also provides information on the latest collision repair tools, equipment, and techniques as well as important safety tips and strategies for students to use in protecting themselves and the environment. It offers an insight into what it takes to become a successful, well-rounded collision repair technician. Graduates of the “Collision Repair and Refinishing Technology” program will be presented with the basic skills and knowledge that an entry-level technician needs to obtain employment in the collision industry. Upon graduation, the student will be qualified to work in a shop that repairs conventional and unitized bodies using various manufacturers frame, alignment, and paint equipment. This program is structured to prepare the student for I-CAR Pro Level 1 Certifications in both the Non-Structural and Refinish areas along with preparation for I-CAR steel and aluminum welding certifications. Students will be required to complete out-of-class assignments in each course.

Provide the graduate with the entry-level knowledge and skills required to correctly test, diagnose, replace, repair and adjust diesel engines, electrical, charging, starting, lighting, brakes, and steering and suspension systems on trucks. Upon completion of the program, graduates will be qualified for entry into the truck service career field as a mechanic capable of performing most common service operations and with supervision may perform more specialized or complex tasks.Students will be required to complete out-of-class assignments in each course.

This program is designed to prepare students for entry into the diesel and truck career field. Students enrolled in this program will learn theory, functions, diagnostics, and repair of diesel engines and truck systems. Using industry standard tools and equipment, students will diagnose and repair electrical and mechanical systems on diesel engines, trucks, and trailers. Upon successful completion of the program, the graduate should possess knowledge and versatility in the diesel and truck repair field to qualify for entry-level positions as a mechanic, technician, mechanic’s helper, or a fleet service technician in truck dealerships, fleet maintenance departments, private repair enterprises, or franchised truck repair organizations. Students will be required to complete out-of-class assignments in each course.

A strong domestic manufacturing base is vital to the United States economy, as manufactured goods are necessary for trade. The term manufacturing is very broad and includes the use of machine tools required to manufacture finished products. These products can range from an array of plastics to wood and metals. Manufacturers use sophisticated turning and milling machines, grinders, and computerized numerical control (CNC) machines to bring products from concept design to reality.

The CNC Machining and Manufacturing Technology program prepares students for entry-level positions as CNC Operators or Set-up Technicians within a Modern Manufacturing facility. Students will learn about the fundamental skills needed for the operation and setup of complex manufacturing machines that utilize turning, milling and multi-axis machining technology. Students will be prepared to qualify for credentials from the National Institute for Metalworking Skills (NIMS) in the areas of Materials, Measurement and Safety, Job Planning, Bench work and Layout, CNC Milling (setup and programming), CNC Turning (setup and programming), CNC Operator - Turning, and CNC Operator - Milling.

Students will be required to complete out-of-class assignments in each course.